Candidates should be able to configure an FTP server for anonymous downloads and uploads. This objective includes configuring user access, and precautions to be taken if anonymous uploads are permitted.
Configuration files, tools and utilities for Pure-FTPd and vsftpd
Awareness of ProFTPd
Understanding of passive vs. active FTP connections
FTP is a service that uses two ports for communication. Port 21 is used for the command port (also known as control port) and port 20 for the data port. FTP has two modes, active and passive FTP. These modes differ in the way connections are initiated. In active mode the client initates the control connection and the server initiates the data connection. In passive mode the client initiates both connections.
In active mode the client starts an FTP session. This is done by initiating a control connection originating on an unprivileged port (>1023) to port 21 on the server. The client sends the server the IP address and port number on which the client will listen for the data connection. Usually this port is the next port above the used control connections port on the client. The server sends an ACK to the clients command port and actively opens a data connection originating on port 20 to the client. The client sends back an ACK on the data connection.
Active mode example:
The client opens up a command channel from client port 1050 to server port 21.
The client sends PORT 1051 (1050 + 1) to the server and the server acknowledges on the command channel.
The server opens up a data channel from server port 20 to client port 1051.
The client acknowledges on the data channel.
In situations in which the client is behind a firewall and unable to accept incoming TCP connections, passive mode may be used. In passive mode the client starts an FTP session. This is done by initiating a control connection originating on an unprivileged port (>1023) to port 21 on the server. In this mode the client sends a PASV command to the server and receives an IP address and port number in return. The server replies with PORT XXXX where XXXX is the unprivileged port the server listens for the data connection and passively waits for the data connection. The client opens the data connection from the next port above the control connections port to the port specified in the PORT reply on the server. The server sends back an ACK to the client on the data connection.
Passive mode example:
Client opens up command channel from client port 1050 to server port 21.
Client sends PASV command to server on command channel.
Server sends back (on command channel) PORT 1234 after starting to listen on that port.
Client opens up data channel from client 1050 to server port 1234.
Server acknowledges on data channel.
vsftpd (very secure FTP daemon) is a very popular, versatile, fast and secure FTP server.
# If enabled, vsftpd will run in standalone mode. This means that # vsftpd must not be run from an inetd of some kind. Instead, the # vsftpd executable is run once directly. vsftpd itself will then # take care of listening for and handling incoming connections. # Default: NO listen=NO # Controls whether local logins are permitted or not. If enabled, # normal user accounts in /etc/passwd (or wherever your PAM config # references) may be used to log in. This must be enable for any # non-anonymous login to work, including virtual users. # Default: NO local_enable=YES # This controls whether any FTP commands which change the filesystem # are allowed or not. These commands are: STOR, DELE, RNFR, # RNTO, MKD, RMD, APPE and SITE. # Default: NO write_enable=YES # Controls whether anonymous logins are permitted or not. If # enabled, both the usernames ftp and anonymous are recognised as # anonymous logins. # Default: YES anonymous_enable=YES # This option represents a directory which vsftpd will try to # change into after an anonymous login. Failure is silently # ignored. # Default: (none) anon_root=/var/ftp/pub # If set to YES, anonymous users will be permitted to upload files # under certain conditions. For this to work, the option # write_enable must be activated, and the anonymous ftp user must # have write permission on desired upload locations. This setting # is also required for virtual users to upload; by default, virtual # users are treated with anonymous (i.e. maximally restricted) privilege. # Default: NO anon_upload_enable=YES # When enabled, anonymous users will only be allowed to download # files which are world readable. This is recognising that the ftp # user may own files, especially in the presence of uploads. # Default: YES anon_world_readable_only=NO
Create the ftp user:
useradd --home /var/ftp --shell /bin/false ftp
Create the FTP directory:
mkdir -p --mode 733 /var/ftp/pub/incoming
Set up inetd to listen for FTP traffic and start vsftpd. Add the following line
ftp stream tcp nowait root /usr/sbin/tcpd /usr/sbin/vsftpd
Reload the inetd daemon.
An online HTML version of the manual page which lists all vsftpd config options can be found at: Manpage of vsftpd.conf.
When anonymous users should only be allowed to upload files, e.g., for sending files for analyses to remote support, make sure this directory is read-writable by the owner, root, and writeable but not readable by group members and others. This allows the anonymous user to write into the incoming directory but not to change it.
Pure-FTPd is a highly flexible, secure and fast FTP server.
Unlike many daemons, Pure-FTPd doesn't read any configuration file (except for LDAP and SQL when used). Instead, it uses command-line options. For convenience a wrapper is provided which reads a configuration file and starts Pure-FTPd with the right command-line options.
Specific configuration options of pure-ftpd can be found at: Pure-FTPd Configuration file.
If you want to listen for an incoming connection on a non-standard port,
-S and the port number:
/usr/local/sbin/pure-ftpd -S 42
If your system has many IP addresses and you want the FTP server to be reachable on only one of these addresses, let's say 192.168.0.42, just use the following command:
/usr/local/sbin/pure-ftpd -S 192.168.0.42,21
The 21 port number could be left away since this is the default port.
To limit the number of simultaneous connections use the
/usr/local/sbin/pure-ftpd -c 50 &
Create the ftp user:
useradd --home /var/ftp --shell /bin/false ftp
Create the ftp directory structure with the correct permissions:
# Set the proper permissions to disable writing mkdir -p --mode 555 /var/ftp mkdir -p --mode 555 /var/ftp/pub # Set the proper permissions to enable writing mkdir -p --mode 755 /var/ftp/pub/incoming
chown -R ftp:ftp /var/ftp/ 192552 0 dr-xr-xr-x 3 ftp ftp 16 Mar 11 11:54 /var/ftp 192588 0 dr-xr-xr-x 3 ftp ftp 8 Mar 11 11:07 /var/ftp/pub 192589 0 drwxr-xr-x 2 ftp ftp 8 Mar 11 11:55 /var/ftp/pub/incoming
Set up inetd to listen for FTP traffic and start pure-ftpd.
Add the following line to
ftp stream tcp nowait root /usr/sbin/tcpd /usr/sbin/pure-ftpd -e
Reload the inetd daemon:
killall -HUP inetd
kill -HUP $(cat /var/run/inetd.pid)
There are numerous FTP servers available and in use on Linux systems. Some alternatives to the servers mentioned above are: wu-ftpd and ProFTPd.
ProFTPd - Professional configurable, secure file transfer protocol server.
SYNOPSIS proftpd [ -hlntv ] [ -c config-file ] [ -d debuglevel ] [ -p 0|1 ]
proftpd is the Professional File Transfer Protocol (FTP) server daemon. The server may be invoked by the Internet “super-server” inetd(8) each time a connection to the FTP service is made, or alternatively it can be run as a standalone daemon.
When proftpd is run in standalone mode and it receives
a SIGHUP then it
will reread its configuration file. When run in standalone mode without
the -n option, the main proftpd daemon writes its process ID to
/var/run/run/proftpd.pid to make it easy to know
which process to SIGHUP.
See the man page of proftpd for detailed information on this ftp server. Detailed information can be found at: The ProFTPd Project.