Skip to content


Basic Apache Configuration (208.1)

Candidates should be able to install and configure a web server. This objective includes monitoring the server's load and performance, restricting client user access, configuring support for scripting languages as modules and setting up client user authentication. Also included is configuring server options to restrict usage of resources. Candidates should be able to configure a web server to use virtual hosts and customise file access.

Key Knowledge Areas

  • Apache 2.x including 2.4 configuration files, terms and utilities

  • Apache log files configuration and content

  • Access restriction methods and files

  • mod_perl and PHP configuration

  • Client user authentication modules, files and utilities

  • Configuration of maximum requests, minimum and maximim servers and clients

  • Apache 2.x virtual host implementation (with and without dedicated IP addresses)

  • Using redirect statements in Apache's configuration files to customise file access

Terms and utilities

  • access.log or access_log

  • error.log or error_log

  • .htaccess

  • httpd.conf

  • mod_auth

  • mod_authn_file

  • mod_access_compat

  • htpasswd

  • AuthUserFile, AuthGroupFile

  • apache2ctl

  • httpd

Installing the Apache web-server

Building Apache from source was routinely done when Apache emerged. Nowadays Apache is available in binary format for most modern (post 2005) Linux distributions. Installing programs from source is already covered in 206.1. Therefore, we will concentrate on working with rpm and apt package managers and tools during this chapter. Do not underestimate the importance of building Apache from source though. Depending on requirements and (lack of) availability, it might still be necessary to compile Apache and Apache modules from source. The Apache binary httpd can be invoked with certain command-line options that affect the behaviour of the server. But in general Apache is started by other scripts that serve as a wrapper for httpd. These scripts should take care of passing required flags to httpd. The behaviour of the server is configured by setting various options called directives. These directives are declared in configuration files. ApacheApache2 configuration files The location of configuration files and how they are organized varies. Red Hat and similar distributions have their configuration files in the /etc/httpd/conf directory. Other locations which are or have been used are /etc/apache/config, /etc/httpd/config and /etc/apache2.

Depending on your Linux distribution and enabled repositories, your distribution may come with Apache 2.2 or Apache 2.4 or both. Apache 2.0 does comply to the LPIC-2 Apache 2.x scope due to its name, but Apache 2.0 is no longer maintained. It is therefore not recommended to use Apache 2.0. Instead, Apache 2.4 is recommended to be used by the Apache foundation. As a Linux administrator, you may however still encounter Apache 2.0 on servers. It is therefore recommended to be familiar with the configuration differences between the different versions. The Apache foundation does provide guidence: Via upgrade documents can be accessed that address the necessary steps when upgrading from Apache 2.0 to 2.2, and from Apache 2.2 to 2.4.

It is important to distinguish between (global) directives that affect the Apache server processes, and options that affect a specific component of the Apache server, i.e. an option that only affects a specific website. The way the configuration files are layed out can often be a clue as to where which settings are configured. Despite this presumed obviousness, it is also important not to make assumptions. Always familiarize yourself with all the configured options. When in doubt about a specific option, use the documentation or a web search to find out more and consider whether the option is configured appropriately.

On many (Red Hat based) distributions the main Apache configuration file is httpd.conf, other (Debian based) distributions favour the apache2.conf filename. Depending on your distribution and installation it might be one big file or a small generic one with references to other configuration files via Include and/or IncludeOptional statements. The difference between these two directives lies in the optional part. If Apache is configured to Include all *.conf files from a certain directory, there has to be at least one file that matches that pattern to include. Otherwise, the Apache server will fail to start. As an alternative, the IncludeOptional directive can be used to include configuration files if they are present and accessible. The Apache main configuration file can configure generic settings like servername, listening port(s) and which IP addresses these ports should be bound to. There may also be a seperate ports.conf configuration file though, so always follow the Include directives and familiarize yourself with the contents of all configuration files. The user and group Apache should run as can also be configured from the main configuration file. These accounts can be set to switch after startup. This way, the Apache software can be started as the root user, but then switch to a dedicated "www", "httpd" or "apache" user to adhere to the principle of least privilege. There are also various directives to influence the way Apache serves files from its document tree. For example there are Directory directives that control whether it is allowed to execute PHP files located in them. The default configuration file is meant to be self explanatory and contains a lot of valuable information. In regards to the LPIC-2 exam, you are required to be familiar with the most common Apache directives. We shall cover some of those in the section to come. At the time of this writing, Apache 2.4 is the latest stable version and the recommended version to use according to it's distributor, the Apache Foundation. Where applicable, this book will try to point out the differences between the various versions.

An additional method to set options for a subdivision of the document tree is by means of an .htaccess file. For security reasons you will also need to enable the use of .htaccess files in the main configuration file by setting the AllowOverride directive for that Directory context. All options in an .htaccess file influence files in the directory and the ones below it, unless they are overridden by another .htaccess file or directives in the main configuration file.


Apache has a modular source code architecture. You can custom build a server with only modules you really want. Many modules are available on the Internet and you could also write your own.

Modules are compiled objects written in C. If you have questions about the development of Apache modules, join the Apache-modules mailing list at Remember to do your homework first: research past messages and check all the documentation on the Apache site before posting questions.

Special modules exist for the use of interpreted languages like Perl and Tcl. They allow Apache to run interpreted scripts natively without having to reload an interpreter every time a script runs (e.g. mod_perl and mod_tcl). These modules include an API to allow for modules written in an interpreted (scripted) language.

The modular structure of Apache's source code should not be confused with the functionality of run-time loading of Apache modules. Run-time Apachemodules modules are loaded after the core functionality of Apache has started and are a relatively new feature. In older versions, to use the functionality of a module, it needed to be compiled in during the build phase. Current implementations of Apache are capable of run-time module loading. The section on DSO has more details.

Run-time loading of modules (DSO) {#DSO}

Most modern Unix derivatives have a mechanism for the on demand linking and loading of so called Dynamic Shared Objects (DSO). This is a way to load a Dynamic Shared Objects special program into the address space of an executable at run-time. This can usually be done in two ways: either automatically by a system program called when the executable is started, or manually from within the executing program with the system calls dlopen() and dlsym().

In the latter method the DSO's are usually called shared objects or DSO files and can be named with an arbitrary extension. By convention the extension .so is used. These files are usually installed in a program-specific directory. The executable program manually loads the DSO at run-time into its address space via dlopen().

How to run Apache-SSL as a shareable (DSO) module: Install the appropriate package:

    packagemanager installcommand modulename

Depending on your distribution, the configuration file(s) might or might not have been adjusted accordingly. Always check for the existence of a LoadModule line in one of the configuration files:

    LoadModule apache_ssl_module modules/

This line might belong in the Apache main configuration file, or one of the included configuration files. A construction that has been receiving much support lately, is the use of seperate modules-available and modules-enabled directories. These directories are subdirectories inside the Apache configuration directory. Modules are installed in the modules-available directory, and an Include reference is made to a symbolic link inside the modules-enabled directory. This symbolic link then points back to the module. The Include reference might be a wildcard, including all files from a certain directory.

Another construction is similar, but includes a conf.modules.d directory inside the Apache configuration directory. This file is in fact a symbolic link, pointing to a directory inside the Apache program directory somewhere else on the filesystem. An example from a Red Hat based host:

    Include conf.modules.d/*.conf

Again, the implementations you could encounter might differ significantly from each other. Various aspects such as Linux distribution used, Apache version installed or whether Apache is installed from packages or source may be of influence to the way Apache is implemented. Not to mention the administrator on duty. Important to remember is that Apache often uses configuration files that may be nested. But that there will always be one main Apache configuration file, at the top of the hiearchy.

To see whether your version of Apache supports DSOs, execute the command httpd -l which lists the modules that have been compiled into Apache. Apachehttpd If mod_so.c appears in the list of modules then your Apache server can make use of dyamic modules.

APache eXtenSion (APXS) support tool

The APXS is a new support tool from Apache 1.3 and onwards which can be used ApacheAPXS APXS to build an Apache module as a DSO outside the Apache source-tree. It knows the platform dependent build parameters for making DSO files and provides an easy way to run the build commands with them.

Monitoring Apache load and performance

An Open Source system that can be used to periodically load-test pages of web-servers is Cricket. Cricket can be Cricket easily set up to record page-load times, and it has a web-based grapher that will generate charts to display the data in several formats. It is based on RRDtool whose ancestor is MRTG (short MRTG for "Multi-Router Traffic Grapher"). RRDtool (Round Robin RRDtool Data Tool) is a package that collects data in "round robin" databases; each data file is fixed in size so that running Cricket does not slowly fill up your disks. The database tables are sized when created and do not grow larger over time. As the data ages, it is averaged.

Enhancing Apache performance

Lack of available RAM may result in memory swapping. A swapping webserver will perform badly, especially if the disk subsystem is not up to par. Causing users to hit stop and reload, further increasing the load. You can use the MaxClients setting to limit the amount of children your server may spawn hence reducing memory footprint. It is advised to grep through the Apache main configuration file for all directives that start with Min or Max. These settings define the MINimal and MAXimum boundaries for each affected setting. The default values should provide a concense balance between server load at idle on one hand, and the possibility to handle heavy load on the other. As each chain is only as strong as it's weakest link, the underlying system should be adequatetly configured to handle the expected load. The LPIC-2 exam focuses more on the detection of these performance bottlenecks in chapter 200.1.

Apache access_log file

access logs The access_log contains a generic overview of Apacheaccess_log page requests for your web-server. The format of the access log is highly configurable. The format is specified using a format string that looks much like a C-style printf format string. A typical configuration for the access log might look like the following:

    LogFormat "%h %l %u %t \"%r\" %>s %b" common
    CustomLog logs/access_log common

This defines the nickname common and associates it with a particular log format string. The format as shown is known as the Common Log Format (CLF). Common Log Format ApacheCLF It is a standard format produced by many web servers and can be read by most log analysis programs. Log file entries produced in CLF will look similar to this line: - bob [10/Oct/2000:13:55:36 -0100] "GET /apache_pb.gif HTTP/1.0" 200 2326

CLF contains the following fields:

  1. IP address of the client (%h)

  2. RFC 1413 identity determined by identd (%l)

  3. userid of person requesting (%u)

  4. time server finished serving request (%t)

  5. request line of user (%r)

  6. status code servers sent to client (%s)

  7. size of object returned (%b).

Apache error_log file

The server error log, whose name and location is set by the ErrorLog directive, is a very important log file. This is the file to which Apache httpd will send diagnostic information and record any errors that it encounters in processing requests. It is a good place to look when a problem occurs starting the server or while operating the server. It will often contain details of what went wrong and how to fix it.

The error log is usually written to a file (typically error_log on Unix systems and error.log on Windows). On Unix systems it is also possible to have the server send errors to syslog or pipe them to a program.

The format of the error log is relatively free-form and descriptive. But there is certain information that is contained in most error log entries. For example, here is a typical message:

    [Wed Oct 11 14:32:52 2000] [error] [client] client denied by server \
    configuration: /export/home/live/ap/htdocs/test

The first item in the log entry is the date and time of the message. The second item lists the severity of the error being reported. The LogLevel directive is used to control the types of errors that are sent to the error log by restricting the severity level. The third item gives the IP address of the client that generated the error. Beyond that is the message itself, which in this case indicates that the server has been configured to deny the client access. The server reports the file-system path (as opposed to the web path) of the requested document.

A very wide variety of different messages can appear in the error log. Most look similar to the example above. The error log will also contain debugging output from CGI scripts. Any information written to stderr by a CGI script will be copied directly to the error log.

It is not possible to customize the error log by adding or removing information. However, error log entries dealing with particular requests have corresponding entries in the access log. For example, the above example entry corresponds to an access log entry with status code 403. Since it is possible to customize the access log, you can obtain more information about error conditions using that log file.

During testing, it is often useful to continuously monitor the error log for any problems. On Unix systems, you can accomplish this using:

    tail -f error_log

Knowing how to customize Apache logging may prove to be a very usable skill. Manually reviewing Apache logs is not for the faint of heart. For a low-traffic server, this may still be doable. Otherwise, looking for information by sifting through logs on a busy server that serves multiple websites, can become a very intense textfile-manipulating-excercise. This creates a paradox: With little to no logging, hardly any input is available when looking for the cause of a problem. With very elaborate logging in place, the information may be overwhelming. For this reason, Apache logs are often interpreted by external facilities. The logs are either sent to or read by a system that has the capability to visualize statistics and recognize patterns. To ensure the provided logging is adequate, customizing the Apache logging first may be necessary.

Apache 2.3.6 and later provide the possibility to enable different kinds of LogLevel configurations on a per-module or per-directory basis. The Apache documentation regarding the Loglevel directive is outstanding and there is not much we could add to that.

Restricting client user access

Many systems use either DAC or MAC to control access to objects:

Discretionary Access Control (DAC)

  • A system that employs DAC allows users to set object permissions themselves. They can change these at their discretion. ApacheDiscretionary Access Control

Mandatory Access Controls (MAC)

  • A system that employs MAC has all its objects (e.g., files) under strict control of a system administrator. Users are not allowed to set any permissions themselves. ApacheMandatory Access Control

Apache takes a liberal stance and defines discretionary controls to be controls based on usernames and passwords, and mandatory controls to be based on static or quasi-static data like the IP address of the requesting client.

Apache uses modules to authenticate and authorise users. First of all, the difference between authentication and authorization should be clear. Authentication is the process in which a user should validate their identity. This is the who part. Authorization is the process of deciding who is allowed to do what. Authorization either allows or denies requests made to the Apache server. Authorization depends on authentication to make these decisions.

The Apache modules that serve the purpose of autheNtication, follow the naming convention of mod_authn_*. The modules that serve the purpose of authoriZation, follow the convention of mod_authz_*. An exception to this rule is the mod_authnz_ldap module. As you might have guessed, due to the nature of LDAP this module can aid in both authentication as well as authorization.

The location of these modules on the filesystem may vary. Most distributions create a modules, modules.d or modules-available directory within the Apache configuration directory. This directory can very well be a symbolic link to a directory somewhere else on the filesystem. This can be determined by invoking pwd -P or ls -ld from within the modules directory as shown by the following example:

                [user@redhatbased /etc/httpd]$ pwd -P

In the example above, the symbolic link /etc/httpd/modules provides for easy reference to the modules from within Apache configuration files. Apache modules are loaded using the LoadModule directive. This directive expects the path to the module to be relative to the Apache configuration directory declared by the ServerRoot directive.

In general, modules will Apachemod_auth use some form of database to store and retrieve credential data. The mod_authn_file module for instance uses text files where mod_auth_dbm employs a Unix DBM database.

Below is a list of some modules that are included as part of the standard Apache distribution.


  • (DAC) This is the basis for most Apache security modules; it uses ordinary text files for the authentication database.


  • (MAC) This used to be the only module in the standard Apache distribution which applies Apachemod_access what Apache defines as mandatory controls. It used to allow you to list hosts, domains, and/or IP addresses or networks that were permitted or denied access to documents. As of Apache 2.4, this module is no longer used. Apache 2.4 and newer use an updated authentication and authorization model. This new model also comes with new modules, new directives and new syntax. The mod_access module is still an LPIC-2 exam objective, so the pre-2.4 syntax should still be familiar to you. In order to aid the migration towards Apache 2.4, a module called mod_access_compat ships with Apache 2.4. This module serves the purpose of still accepting the pre-2.4 syntax on Apache 2.4 servers. If you encounter mod_access related errors after upgrading to Apache 2.4 from a previous version, make sure the Apache 2.4 configuration loads this compabibility module with a line similar to:
                                    LoadModule mod_access_compat modules/


  • (DAC) This module mimics the behaviour of anonymous FTP. Rather than having a Apachemod_auth_anon database of valid credentials, it recognizes a list of valid usernames (i.e., the way an FTP server recognizes "ftp" and "anonymous") and grants access to any of those with virtually any password. This module is more useful for logging access to resources and keeping robots out than it is for actual access control.


  • (DAC) Like mod_auth_db, except that credentials are stored in a Unix DBM file.


  • (DAC) This module implements HTTP Digest Authentication (RFC2617), Apachemod_auth_digest which used to provide a more secure alternative to the mod_auth_basic functionality. The explanation that follows is nice to know but outdated. The whole point of digest authentication was to prevent user credentials to travel via unencrypted HTTP over the wire. The hashing algorithms used by the digest module are however seriously outdated. Using digest authentication instead of basic HTTP authentication does not offer as many advantages in terms of security as the use of HTTPS would. The following documentation page provides more detail:

    After receiving a request and a user name, the server will challenge the client by sending a nonce. The contents of a nonce can be any (preferably base 64 encoded) string, and the server may use the nonce to prevent replay attacks. A nonce might, for example, be constructed using an encrypted timestamp within a resolution of a minute, i.e. '201611291619'. The timestamp (and maybe other static data identifying the requested URI) might be encrypted using a private key known only to the server.

    Upon receival of the nonce the client calculates a hash (by default a MD5 checksum) of the received nonce, the username, the password, the HTTP method, and the requested URI and sends the result back to the server. The server will gather the same data from session data and password data retrieved from a local digest database. To reconstruct the nonce the server will try twice: the first try will use the current clocktime, the second try (if necessary) will use the current clocktime minus one minute. One of the tries should give the exact same hash the client calculated. If so, access to the page will be granted. This restricts validity of the challenge to one minute and prevents replay attacks.

    Please note that the contents of the nonce can be chosen by the server at will. The example provided is one of many possibilities. Like with mod_auth, the credentials are stored in a text file (the digest database). Digest database files are managed with the htdigest tool. Please refer to the module documentation for more details.


  • The mod_authz_host module may be used to Require a certain source of request towards Apache. The mod_authz_host module is quite flexible about the arguments provided. Due to the name of the module, it may seem logical to provide a hostname. While this certainly works, it may not be the preferred choice. Not only does this module need to perform a forward DNS lookup on the provided hostname to resolve it to a numerical IP, the module is also configured to perform a reverse DNS lookup on the resolved numerical IP after the forward lookup is performed. Providing a hostname thus leads to at least two DNS lookups for every affected webserver request. And if the reverse DNS result differs from the provided hostname, the request will be denied despite what the configuration may allow. To circumvent this requirement regarding forward and reverse DNS records matching, the forward-dns option may be used when providing a hostname. Luckily, mod_authz_host not only accepts hostnames as an argument. It can also handle (partial) IP addresses, both IPv4 and IPv6, and CIDR style notations. There is also an argument available called local. This will translate to the or ::1 loopback addresses as well as the configured IP addresses of the server. This setting may come in handy when restricting connections in regards to the local host. Because of the liberal way that IP addresses are interpreted, it is recommended to be as explicit as possible when using this module. For instance, all of the following is regarded as valid input and will be interpreted by the rules that apply:
        Require host:
        Require ip: 10.6.6
        Require ip: 172
        Require ip:
        Require forward-dns:
        Require local

One of the noteworthy differences between Apache 2.2 and 2.4 lies in the directives used for authorization. The authorization functionality is provided by Apache mod_authz_* modules. Where previous versions of Apache used the Order, Allow from, Deny from and Satisfy directives, Apache 2.4 uses new directives called all, env, host and ip. These new directives have a significant impact on the syntax of configuration files. In order to aid the transition towards Apache 2.4, the mod_access_compat module can still interpret the previously used authorization directives. This module has to be explicitly enabled though. In doing so, backwards compatibility towards previous authorization configuration directives is maintained. The current authorization directives provide the possibility of a more granular configuration in regards to who is authorized to do what. This added granularity mostly comes from the availability of the Require directive. This directive could already be used before Apache 2.4 for authentication purposes. Since Apache 2.4 though, this directive can also be interpreted by the authorization modules.

The following example puts the old en new syntax in comparison, while providing the same functionality.

First, the pre-2.4 style:

    <Directory /lpic2bookdev>
    Order deny,allow
    Deny from all
    allow from
    Require group employees
    Satisfy any

And now the same codeblock, but using the Apache 2.4 style syntax:

    <Directory /lpic2bookdev>
    Require ip
    Require group employees

The benefit of the new syntax is all about efficiency. By accomplishing the same functionality with fewer lines, the processing of those lines will be handled more effectively by both humans and computers. The computers benefit from spending less processing cycles while accomplishing the same result. Humans benefit from a short configuration section. Long configurations are more prone to contain errors that may be overlooked. By creating sections within configuration files using the RequireAll, RequireAny, and RequireNone directives, these configurations can contain granular rules while at the same time preserving their readability.

Another 2.4 change that is worth mentioning, has to do with the LPIC-2 exam objective regarding the mod_auth module. Starting with Apache 2.1, the functionality of the mod_auth module has been superseeded by more specific modules. One of these modules, mod_authn_file now provides the functionality that was previously offered by mod_auth. mod_authn_file allows for the use of a file that holds usernames and password as part of the authorization process. This file can be created and the contents may be maintained by the htpasswd utility. When using mod_auth_digest instead of mod_auth_basic, the htdigest utility should be used instead. This book will focus on the mod_auth_basic option. The htpasswd -c option will create a file with the provided argument as a filename during creation of a username and password pair. htpasswd allows for the creation of crypt, MD5 or SHA1 password algorithms. As of Apache 2.4.4, it is also possible to use bcrypt as the password encryption algorithm. Plaintext passwords can also be generated using the htpasswd -p option, but will only work if Apache 2.4 is hosted on Netware and MS Windows platforms. The crypt algorithm used to be the htpasswd default algorithm up to Apache version 2.2.17, but is considered insecure. Crypt will limit the provided password to the first eight characters. Every part of the password string from the ninth character on will be neglected. Crypt password strings are subject to fast brute force cracking and therefore pose a considerable security risk. The use of the crypt algorithm should be avoided whenever possible. Instead, the bcrypt algorithm should be considered when available. On a system with Apache 2.4.4 or later, the following syntax can be used to create a new password file htpasswdfile, supply it with the user "bob" and set the password for the user account using the bcrypt algorithm:

    htpasswd -cB /path/outside/document/root/htpasswdfile bob

The system will ask for the new password twice. To update this file anytime later by adding the user "alice", the -c option can be ommited to prevent the file from being rewritten:

    htpasswd -B /path/outside/document/root/htpasswdfile alice

Using the brypt algorithm with htpasswd also enables the use of the -C option. Using this option, the computing time used to calculate the password hash may be influenced. By default, the system uses a setting of 5. A value between 4 and 31 may be provided. Depending on the available resources, a value up to 18 should be acceptable to generate whilst increasing security. To add the user eve to the existing htpasswdfile while increasing the computing time to a value of 18, the following syntax may be used:

    htpasswd -B -C18 /path/outside/document/root/htpasswdfile eve

In the examples above, it is suggested that the password file is created outside of the webserver document tree. Otherwise, it could be possible for clients to download the password file.

To use the generated password file for authentication purposes, Apache has to be aware of the htpasswdfile file. This can be accomplished by defining the AuthUserFile directive. This directive may be defined in either the Apache configuration files, or in a seperate .htaccess file. That .htaccess file should be located inside the directory of the document root it should represent. The Apache config responsible for that document root should have the AllowOverride directive specified. This way Apache will override directives from its configuration for directories that have .htaccess documents in them. The syntax for the .htaccess documents is the same as for Apache configuration files. A code block to use for user authentication could look as follows:

    <Directory /web/document/root>
    AuthName "Authentication Required"
    AuthType Basic
    AuthUserFile /path/outside/document/root/htpasswdfile
    Require valid-user
    Documentroot /web/document/root

Consult the contents of your Apache modules directory for the presence of mod_auth* files. There are multiple authentication and authorization modules available. Each has its own purpose, and some depend on each other. Each module adds functionality within Apache. This functionality can be addressed by using specific module-specific directives. Refer to the Apache documentation website for detailed usage options regarding the modules available for Apache 2.4.

Configuring authentication modules

ConfiguringApache Authentication Modules Apache security modules are configured by configuration directives. These are read from either the centralized configuration files (mostly found under or in the /etc/ directory) or from decentralized .htaccess files. The latter are mostly used to restrict access to directories and are placed in the top level directory of the tree they help to protect. For example, authentication Apache.htaccess modules will read the location of their databases using the ApacheAuthUserFile ApacheAuthDBMGroupFile AuthUserFile or AuthDBMGroupFile directives.

Centralized configuration.

This is an example of a configuration as it might occur in a centralized configuration file: ApacheAuthType ApacheRequire valid-user

    <Directory /home/johnson/public_html>
    AuthName "Foo for Thought"
    AuthType Basic
    AuthUserFile /home/johnson/foo.htpasswd
    Require valid-user

The resource being protected is "any file named" in the /home/johnson/public_html directory or any underlying subdirectory. Likewise, the file specifies whom are authorized to access any user that has credentials in the /home/johnson/foo.htpasswd file.

Decentralized configuration.

The alternate approach is to place a .htaccess file in the top level directory of any document tree that needs access protection. Note that you must set the directive AllowOverride ApacheAllowOverride in the central configuration to enable this.

The first section of .htaccess determines which authentication type should be used. It can contain the name of the password or group file to be used, e.g.:

    AuthUserFile {path to passwd file}
    AuthGroupFile {path to group file}
    AuthName {title for dialog box}
    AuthType Basic

The second section of .htaccess ensures that only user {username} can access (GET) the current directory:

    <Limit GET>
    require user {username} 

The Limit section can contain other directives to ApacheLimit restrict access to certain IP addresses or to a group of users.

The following would permit any client on the local network (IP addresses 10.*.*.*) to access the foo.html page and require a username and password for anyone else:

    <Files foo.html>
    Order Deny,Allow
    Deny from All
    Allow from
    AuthName "Insiders Only"
    AuthType Basic
    AuthUserFile /usr/local/web/apache/.htpasswd-foo
    Require valid-user
    Satisfy Any

User files

The mod_auth module uses plain text files that contain lists of valid users. The htpasswd Apachehtpasswd command can be used to create and update these files. The resulting files are plain text files, which can be read by any editor. They contain entries of the form "username:password", where the password is encrypted. Additional fields are allowed, but ignored by the software.

htpasswd encrypts passwords using either a version of MD5 modified for Apache or the older crypt() routine. You can mix and match.

    htpasswd [ -c ] passwdfile username

Here are two examples of using htpasswd for creating an Apache password file. The first is for creating a new password file while adding a user, the second is for changing the password for an existing user.

    $ htpasswd -c /home/joe/public/.htpasswd joe
    $ htpasswd /home/joe/public/.htpasswd stephan

Note Using the -c option, the specified password file will be overwritten if it already exists!

Group files

Apache can work with group files. Group files contain group names followed by the names of the people in the group. By authorizing a group, all users in that group have access. Group files are known as .htgroup files and by convention bear that name - though you can use any name you want. Group files can be located anywhere in the directory tree but are normally placed in the toplevel directory of the tree they help to protect. To allow the use of group files you will need to include some directives in the Apache main configuration file. This will normally be inside the proper Directory definition. Where the AuthUserFile may specify either an absolute or relative path, the AuthGroupFile directive will always treat the provided argument as relative to the ServerRoot. The AuthGroupFile file functions as an addition to the AuthUserFile. The file should contain a group on each line, followed by a colon. An example:

ApacheAuthGroupFile Apache main configuration file:

    AuthType Basic
    AuthUserFile /var/www/.htpasswd
    AuthGroupFile /var/www/.htgroup
    Require group Management

The associated .htgroup file might have the following syntax:

    Management: bob alice
    Accounting: joe

Now the accounts "bob" and "alice" would have access to the resource but account "joe" would not due to the "Require group Management" statement in the main configuration file because "joe" is not a member of the required "Management" group. For this to work the users specified in the .htgroup file must have an entry in the .htpasswd file as well.

Note A username can be in more than one group entry. This simply means that the user is a member of both groups.

To use a DBM database (as used by mod_auth_db) you may use dbmmanage. For other types of user files/databases, please consult the documentation that comes with the chosen module.

Note Make sure the various files are readable by the webserver.

Configuring mod_perl

mod_perl is another module for Apache, which loads the Perl interpreter into your Apache webserver, reducing spawning of child processes and hence memory footprint and need for processor power. Another benefit is code-caching: modules and scripts are loaded and compiled only once, and will be served from the cache for the rest of the webserver's life.

ConfiguringApache mod_perl Using mod_perl allows inclusion of Perl statements into your webpages, which will be executed dynamically if the page is requested. A very basic page might look like this:

    print "Content-type: text/plain\r\n\r\n";
    print "Hello, you perly thing!\n";

mod_perl also allows you to write new modules in Perl. You have full access to the inner workings of the web server and can intervene at any stage of request-processing. This allows for customized processing of (to name just a few of the phases) URI->filename translation, authentication, response generation and logging. There is very little run-time overhead.

The standard Common Gateway Interface (CGI) within Apache can be replaced entirely with Perl code that handles the response generation phase of request processing. mod_perl includes two general purpose modules for this purpose. The first is Apache::Registry, which can transparently run well-written existing perl CGI scripts. If you have badly written scripts, you should rewrite them. If you lack resources, you may choose to use the second module Apache::PerlRun instead because it doesn't use caching and is far more permissive then Apache::Registry.

You can configure your httpd server and handlers in Perl using PerlSetVar, and <Perl> ApachePerlSetVar sections. You can also define your own configuration directives, to be read by your own modules.

There are many ways to install mod_perl, e.g. as a DSO, either using APXS or not, from source or from RPM's. Most of the possible scenarios can be found in the Mod_perl Guide ???.

Building Apache from source code

For building Apache from source code you should have downloaded the Apache source code, the source code for mod_perl and have unpacked these in the same directory. You'll need a recent version of perl installed on your system. To build the module, in most cases, these commands will suffice:

    $ cd ${the-name-of-the-directory-with-the-sources-for-the-module}
    $ perl Makefile.PL APACHE_SRC=../apache_x.x.x/src \
    $ make && make test && make install

After building the module, you should also build the Apache server. This can be done using the following commands:

    $ cd ${the-name-of-the-directory-with-the-sources-for-Apache}
    $ make install

All that's left then is to add a few configuration lines to httpd.conf (the Apache configuration file) and start the server. Which lines you should add depends on the specific type of installation, but usually a few LoadModule and AddModule lines suffice.

As an example, these are the lines you would need to add to httpd.conf to use mod_perl as a DSO:

    LoadModule perl_module modules/
    AddModule mod_perl.c
    PerlModule Apache::Registry

    Alias /perl/ /home/httpd/perl/ 
    <Location /perl>
    SetHandler perl-script 
    PerlHandler Apache::Registry 
    Options +ExecCGI
    PerlSendHeader On 

The first two lines will add the mod_perl module when Apache starts. During startup, the PerlModule directive ensures that the named Perl module is read in too. This usually is a Perl package file ending in .pm. The Alias keyword reroutes requests for URIs in the form to the directory /home/httpd/perl. Next, we define settings for that location. By setting the SetHandler, all requests for a Perl file in the directory /home/httpd/perl now will be redirected to the perl-script handler, which is part of the Apache::Registry module. The next line simply allows execution of CGI scripts in the specified location instead of displaying this file. Any URI of the form will now be compiled once and cached in memory. The memory image will be refreshed by recompiling the Perl routine whenever its source is updated on disk. Setting PerlSendHeader to on tells the server to send an HTTP headers to the browser on every script invocation but most of the time it's better either to use the $r->send_http_header method using the Apache Perl API or to use the $q->header method from the module.

Configuring mod_php support

PHP is a server-side, cross-platform, HTML embedded scripting language. ConfiguringApache mod_php PHP PHP started as a quick Perl hack written by Rasmus Lerdorf in late 1994. Later he rewrote his code in C and hence the \"Personal Home Page/Forms Interpreter\" (PHP/FI) was born. Over the next two to three years, it evolved into PHP/FI 2.0. Zeev Suraski and Andi Gutmans wrote a new parser in the summer of 1997, which led to the introduction of PHP 3.0. PHP 3.0 defined the syntax and semantics used in both versions 3 and 4. PHP became the de facto programming language for millions of web developers. Still another version of the (Zend) parser and much better support for object oriented programming led to the introduction of version 5.0 in july 2004. Several subversions followed and also version 6 was started to include native Unicode support. However this version was abandoned. For the year 2015 the start for version 7.0 was planned.

PHP can be called from the CGI interface, but the common approach is to configure PHP in the Apache web server as a (dynamic) DSO module. To do this, you can either use pre-built modules extracted from RPM's or roll your own from the source code. You need to configure the make process first. To tell configure to build the module as a DSO, you need to tell it to use APXS:

    ./configure -with-apxs

.. or, in case you want to specify the location for the apxs binary:

    ./configure -with-apxs={path-to-apxs}/apxs

Next, you can compile PHP by running the make command. Once all the source files are successfully compiled, install PHP by using the make install command.

Before Apache can use PHP, it has to know about the PHP module and when to use it. The apxs program took care of telling Apache about the PHP module, so all that is left to do is tell Apache about .php files. File types are controlled in the httpd.conf file, and it usually includes lines about PHP that are commented out. You may want to search for these lines and uncomment them:

    Addtype application/x-httpd-php .php

Then restart Apache by issuing the apachectl restart command. The apachectl command is another way of passing commands to the Apache server instead of using /etc/init.d/httpd. Consult the apachectl(8) manpage for more information.

To test whether it actually works, create the following page:

    <?php phpinfo( ) ?>

Save the file as test.php in Apache's htdocs directory and aim your browser at http://localhost/test.php. A page should appear with the PHP logo and additional information about your PHP configuration. Notice that PHP commands are contained by <? and ?> tags.

The httpd binary {#apachehttpd}

Apacheapache2ctl> Apacheapachectl> The httpd binary is the actual HTTP server component of Apache. During normal operation, it is recommended to use the apachectl or apache2ctl command to control the httpd daemon. On some distributions the httpd binary is named apache2.

Apache used to be a daemon that forked child-processes only when needed. To allow better response times, nowadays Apache can also be run in pre-forked mode. This means that the server will spawn a number of child-processes in advance, ready to serve any communication requests. On most distributions the pre-forked mode is run by default.

Configuring Apache server options {#apacheoptions}

The httpd.conf file contains a number of sections ConfiguringApache that allow you to configure the behavior of the Apache server. A number of keywords/sections are listed below.


  • The maximum number of requests to allow during a persistent ApacheMaxKeepAliveRequests connection. Set to 0 to allow an unlimited amount.


  • The number of servers to start initially. ApacheStartServers

MinSpareServers; MaxSpareServers

  • Used for server-pool size regulation. Rather than making ApacheMinSpareServers ApacheMaxSpareServers you guess how many server processes you need, Apache dynamically adapts to the load it sees. That is, it tries to maintain enough server processes to handle the current load, plus a few spare servers to handle transient load spikes (e.g., multiple simultaneous requests from a single browser). It does this by periodically checking how many servers are waiting for a request. If there are fewer than MinSpareServers, it creates a new spare. If there are more than MaxSpareServers, the superfluous spares are killed.


  • Limit on total number of servers running, i.e., limit on the number ApacheMaxClients of clients that can simultaneously connect. If this limit is ever reached, clients will be locked out, so it should not be set too low. It is intended mainly as a brake to keep a runaway server from taking the system with it as it spirals down.

Note In most Red Hat derivates the Apache configuration is split into two subdirectories. The main configuration file httpd.conf is located in /etc/httpd/conf. The configuration of Apache modules is located in /etc/httpd/conf.d. Files in that directories with the suffix .conf are added to the Apache configuration during startup of Apache.

Apache Virtual Hosting

Virtual Hosting is a technique that provides the capability virtual hosting to host more than one domain on one physical host. There are two methods to implement virtual hosting:

Name-based virtual hosting

With name-based virtual hosting, the HTTP server relies on the client (e.g. the browser) to report the hostname as part of the HTTP request headers. By using name-based virtual hosting, one IP address may serve multiple websites for different web domains. In other words: Name-based virtual hosts use the website address from the URL to determine the correct virtual host to serve.

IP-based virtual hosting

Using IP-based virtual hosting, each configured web domain is committed to at least one IP address. Since most host systems can be configured with multiple IP addresses, one host can serve multiple web domains. Each web domain is configured to use a specific IP address or range of IP addresses. In other words: IP-based virtual hosts use the IP address of the TCP connection to determine the correct virtual host to serve.

Name-based virtual hosting

Name-based virtual hosting is a fairly simple technique. You need to configure ApacheName-base virtual hosting your DNS server to map each domain name to the correct IP address first. Then, configure the Apache HTTP Server to recognize the different domain names and serve the appropriate websites.

Name-based virtual hosting eases the demand for scarce IPv4 addresses. Therefore you could (or should?) use name-based virtual hosting unless there is a specific reason to choose IP-based virtual hosting, see IP-based Virtual Hosting.

To use name-based virtual hosting, you must designate the IP address (and possibly port) on the server that will be accepting requests for the hosts. On Apache 2.x up to 2.4, this is configured using the NameVirtualHost directive. This NameVirtualHost directive is deprecated since Apache 2.4. Each VirtualHost also implies a NameVirtualHost, so defining a VirtualHost is sufficient from Apache 2.4 on. Any available IP address can be used. There should be a balance between ease of configuration, use and administration on one hand, and security on the other. Using a wildcard as the listening IP address inside a NameVirtualHost or VirtualHost segment will enable the functionality of that specific configuration on all IP addresses specified by the Listen directive of Apache's main configuration file. If the main configuration file also uses a wildcard for the Listen option, this will result in the availability of the Apache HTTPD server on all configured IP addresses of the server. And therefore, the availability of the previously mentioned functionality on all of these IP addresses as well. Whether or not this is either preferable or imposes risk, depends on the circumstances. If the server is using multiple network interfaces and/or IP addresses, special care should be taken when configuring services. Every daemon exposing services to the network could contain code based or configuration errors. These errors could be abused by someone with malicious intentions. By minimizing the so called network footprint of the server, the available attack surface is also minimized. Whether or not the additional configuration overhead of preventing wildcards is worth the effort, will always remain a trade off.

  • Listen can be used to specify the IP addresses and ports to which ApacheListen an Apache listener should be opened in order to serve the configured content.

The <VirtualHost> directive is the next step to create for each different ApacheVirtualHost webdomain you would like to serve. The argument to the <VirtualHost> directive should be the same as the argument to the (pre-Apache 2.4) NameVirtualHost ApacheNameVirtualHost directive (i.e., an IP address or * for all addresses). Inside each <VirtualHost> block you will need, at minimum, a ServerName directive to designate which host is served and a ApacheServerName DocumentRoot directive to point out where in the filesystem the content for ApacheDocumentRoot that webdomain can be found.

Suppose that both www.domain.tld and www.otherdomain.tld point to the IP address You could then add the following to httpd.conf or equivalent (included) configuration file:


    ServerName www.domain.tld
    DocumentRoot /www/domain

    ServerName www.otherdomain.tld
    DocumentRoot /www/otherdomain

The IP address could be replaced by * to match all IP addresses for this server. The implications of using wildcards in this way have been addressed above.

Many websites should be accessible by more than one name. For instance, the organization behind domain.tld wants to facilitate blog.domain.tld. There are multiple ways to implement this functionality, but one of them uses the ServerAlias directive. The ServerAlias directive is declared inside the \<VirtualHost> section. ApacheServerAlias

If, for example, you add the following to the first \<VirtualHost> block above

    ServerAlias domain.tld *.domain.tld

then requests for all hosts in the domain.tld domain will be served by the www.domain.tld virtual host. The wildcard characters * and ? can be used to match names. Apache* Apache?

Of course, you can't just make up names and place them in ServerName or ServerAlias. The DNS system must be properly configured ApacheDNS to map those names to the IP address(es) declared in the NameVirtualHost directive.

Finally, you can fine-tune the configuration of the virtual hosts by placing other directives inside the <VirtualHost> containers. Most directives can be placed in these containers and will then change the configuration only of the relevant virtual host. Configuration directives set in the main server context (outside any <VirtualHost> container) will be used only if they are not overridden by the virtual host settings.

Now when a request arrives, the server will first check if it is requesting an IP address that matches the NameVirtualHost. If it is, then it will look at each <VirtualHost> section with a matching IP address and try to find one where the ServerName or ServerAlias matches the requested hostname. If it finds one, it then uses the corresponding configuration for that server. If no matching virtual host is found, then the first listed virtual host that matches the IP address will be used.

As a consequence, the first listed virtual host is the default virtual host. The DocumentRoot from the main server will never be used when an IP address matches the NameVirtualHost directive. If you would like to have a special configuration for requests that do not match any particular virtual host, put that configuration in a <VirtualHost> container and place it before any other <VirtualHost> container specification in the Apache configuration.

IP-based virtual hosting

Despite the advantages of name-based virtual hosting, there are some reasons why you might consider using IP-based virtual hosting instead. These are niche scenarios though:

  • Some older or exotic web clients are not compatible with name-based virtual hosting for HTTP or HTTPS. HTTPS name-based virtual hosting is implemented using an extension to the TLS protocol called Server Name Indicator (SNI). Most modern browsers on modern operating systems should support SNI at the time of this writing.

  • Some operating systems and network equipment devices implement bandwidth management techniques that cannot differentiate between hosts unless they are on separate IP addresses.

As the term IP-based indicates, the server must have a different IP address for each IP-based virtual host. This can be achieved by equipping the machine with several physical network connections or by using virtual interfaces. Virtual interfaces are supported by most modern operating systems (refer to the system documentation for details on IP aliasing and the ifconfig or ip command).

There are two ways of running the Apache HTTP server to support multiple hosts:

  • By running a separate httpd daemon for each hostname;

  • By running a single daemon that supports all the virtual hosts.

Use multiple daemons when: Apachemultiple daemons

  • There are security issues, e.g., if you want to maintain strict separation between the web-pages for separate customers. In this case you would need one daemon per customer, each running with different User, ApacheUser Group, Listen and ServerRoot ApacheServerRoot settings;

  • You can afford the memory and file descriptor requirements of listening to every IP alias on the machine. It is only possible to Listen to the "wildcard" address, or to specific IP addresses. So, if you need to restrict one webdomain to a specific IP address, all other webdomains need to be configured to use specific IP addresses as well.

Use a single daemon when:

  • Sharing of the httpd configuration between virtual hosts is acceptable;

  • The machine serves a large number of requests, and so the performance loss in running separate daemons may be significant.

Setting up multiple daemons

Create a separate httpd installation for each virtual host. For each installation, use the Listen directive in the configuration file to select which IP address (or virtual host) that daemon services:


The Listen directive may be defined as an IP:PORT combination seperated by colons as above. Another option is to specify only the port number. By doing so, the Apache server will default to activating listeners on all configured IP addresses on the specified port(s):

    Listen 80
    Listen 443

The above Listen configuration could also be defined using as the IP address, again using the colon as a seperator.

Another option of the Listen directive enables the exact specification of the protocol. In the previous example, port 80 and 443 are used. By default, Port 80 is configured for HTTP and port 443 for HTTPS in Apache. This configuration could be expanded by another HTTPS website on port 8443::

    Listen 80
    Listen 443
    Listen 8443 https

When configuring one or more Apache daemons, the Listen directive may be used to specify one or more ports above 1024. This will prevent the necessity of root privileges for that daemon, if no other ports below 1025 are specified. Unless certain key or certificate files which are only accessible with root privileges are included in the configuration. You will read more about this on the next page of this book.

As of Apache 2.4, the Listen directive is mandatory and should be specified. Previous versions of Apache would default to port 80 for HTTP and 443 for HTTPS on all available IP addresses if no Listen directive was specified. Starting with Apache 2.4, the Apache server will fail to start if no valid Listen directive is specified.

Setting up a single daemon

For this case, a single httpd will service requests for the main server and all the virtual hosts. The VirtualHost directive in the configuration file is used to set the values of ServerAdmin, ApacheServerAdmin ServerName, DocumentRoot, ErrorLog and ApacheTransferLog ApacheCustomLog TransferLog or CustomLog configuration directives to different values for each virtual host.

    DocumentRoot /groups/sue/www
    ErrorLog /groups/sue/logs/error_log
    TransferLog /groups/sue/logs/access_log

    DocumentRoot /groups/unix_nl/www
    ErrorLog /groups/unix_nl/logs/error_log
    TransferLog /groups/unix_nl/logs/access_log

Customizing file access {#redirective}

Redirect allows you to tell clients about ApacheRedirect documents which used to exist in your server's namespace, but do not anymore. This allows you to tell the clients where to look for the relocated document.

    Redirect {old-URI} {new-URI}